plastic blow molding machine & pet blow molding machine supplier manufacturer in China

Tel:
+86 0576-84115538
Fax:
+86 0576-84115538 Mobile phone:
013819660222

plastic blow molding machine

if you want get more types of plastic blow molding machine & pet blow molding machine please contact us!

		UNIT	AOK-3000-A	AOK-3000-B
Molding	Clamping force	Kn	16000	16000
	Clamping stroke	mm	80	130
	Stretching stroke	mm	220	320
	Bottom stroke	mm	50	50
	Cavity pitch	mm	88	115
	Number of cavities	cavity	4	4
Container	Max. container volume	ml	700	1500
	Neck diameter range	mm	18~38	18~38
	Max. container diameter	mm	70	90
	Max. container height	mm	220	320
	Carriage unit	pcs	80	80
	THEORETICAL OUTPUT	BPH	3500-4000	3000-3500
Electrical System	Total power	KW	48	56
Electrical System	Heating power	KW	46	54
Air SYSTEM	Operating pressure	kg/cm2	7	7
	Air consuming	M3	1.6	1.6
	Blowing pressure	kg/cm2	35	35
	Air consuming	M3	2.4	3.0
CHILLER	Operating pressure	kg/cm2	3-5	3-5
	Temperature	¡ãC	12-16	12-16
	Consuming	kcal/hr	-	-
	Flow rate	ltr/mm	520	520
COOLING WATER	Operating pressure	kg/cm2	5~6	5~6
	Temperature	¡ãC	25	25
	Flow rate	ltr/mm	520	520
Machine	Machine Dimension (L X W X H)	mm	325021501800	416022001800
Machine	Weight of machine	Kg	3500	4000

We are the professional plastic blow molding machine & pet blow molding machine supplier manufacturer in China. We can produce plastic blow molding machine & pet blow molding machine to your requirements.

1.About design
Advanced structure is designed to improve rate of finished products Two-step dual taper locating technology; each cavity self locked independently; off-center adjustment system make the thickness error of perform less then0.05mm. Bottleneck is adopted International Screw thread standard, No cutting of gate is employed to reduce the labor intensity

2. Material of steel
cavity and core with imported 1.2316 stainless steel with fine polishing, high hardness and anticorrosion to get mold's high precision and good quality.
3.About gate
pin-valve gate ,pneumatic drive the nozzle pin simultaneous high speed open and close action. which can effectively control the injection hole open and close actions on each cavity. reliable seal function, smooth moving, low thermal expansion rate ,long using life and also saves electric energy.

4.About hot runner
hot runner system is designed and made by ourselves, it can achieve ideal and prompt heating effect for preform production ,cavity with lower injection pressure to reduce wear and tear of mould parts.
5.heat system
with double heating system,it has separate temperature control mode ,the heat bar are used to heat the mould mainfold plate,small heaters supply the heating temperature for cavity nozzle continuously.
6.cooling system
each parts including core ,cavity and valve gate has independently cooling system.
7.heat treatment
mechanical treatment cavity and core to prolong service life ,nitrogen treatment with neck screw.with fitly operation ,guarantee Long using life over 2.0 million times of injection cycle
8.special satisfied serve
each mould undergoes strict mould test before delivery.we can provide an experienced team for installation and test as per client's request Standard inter-changeable mould components